1. iVOX – press and repeat to toggle speech on or off, or hold to switch full speech on.
2. Standby - press to switch between standby mode and power on.
3. Sleep - press and repeat to set your radio to enter standby in 15, 30, 45, 60 or 90 minutes.
4. Info - press and repeat to change the display mode between scrolling text, clock, day and date,
programme type, multiplex name, channel, mode and signal quality. Hold down to hear scrolling
text spelled out.
5. Menu - press to access the setup menu, turn the Tune knob to scroll through and push to select
an option. You can also press Menu to exit menus and menu options.
6. Presets (1-5) - press and hold for around two seconds to store a station under that number.
Press and release to select and listen to a preset.
Press up arrow ( ) first to access presets 6-10.
7. Tune - turn to scroll through and press to select radio stations and menu options. Press to hear
current station name and see signal strength.
8. Vol – turn to adjust the volume.
9. SnoozeHandle™ - tap to hear and see the time, set the alarm to snooze or illuminate the clock
in standby. Tap twice to hear alarm settings. Hold in standby to display clock with full brightness.
10. USB - connect to a PC for software upgrades.
11. Digital Out - optical S/PDIF - connect to an external amplifier or recorder.
12. Stereo Out - analogue output - connect to an external amplifier or recorder.
13. Headphone - connect to headphones.
14. Aux Speaker - connect to the optional XT-1 speaker for full stereo output.
15. 9V DC - connect to mains adapter.
Quick start
This section provides information on how to set up and start using your radio.
Fully extend the aerial, connect the mains adapter and plug in to your power
supply.
1
2
Push the Standby button to switch the unit on.
The LCD lights up, the radio says ‘Welcome to the PURE SONUS-1XT with iVOX.
Autotune in progress, please wait’ and a progress bar indicates the progress
of a full autotune to find the stations available. When finished the number of
stations found is announced, the station names are placed in a station list and
you hear the first station.
Adjust the volume control if required.
3
4
Turn the Tune knob to browse the station list. When you stop the station name
will be announced. Push Tune to select and listen to another station.
Push the Info button and repeat to cycle through the optional display modes
including the full screen clock.
5
4
Using your SONUS-1XT
iVOX - Making your radio speak
iVOX brings a new level of accessibility to your radio providing speech
assistance to help you navigate menus, select stations, hear scrolling text and
even check the time and alarm settings.
You can switch speech on or off at any time by pressing the iVOX button or
customise using the iVOX menu options.
Setting the speech mode
1. Press the Menu button, turn the Tune knob and push to select iVOX.
2. Select Speech mode. You see and hear the currently selected speech mode
3. Press Tune and turn and push again to select one of the following options:
iVOX
Full speech
All speech on, including menu options.
This is the default option.
Full speech
Speech mode
Time only
Time only, tap the SnoozeHandle to hear the time.
Stations only
Station names only, scroll station list or select station
to hear.
Time/stations Time and station names only.
Speech disabled All speech off.
5
Spelling unknown stations
By default, if your radio encounters a station for which it has no speech stored it
will announce its name as ‘Unknown’, if preferred you can set your radio to spell
out the name of new or unknown stations by setting this option ‘On’.
iVOX
1. Press the Menu button, turn the Tune knob and push to select iVOX.
2. Select Spell unknown. You see and hear the current state.
3. Press Tune and turn and push again to switch the option on or off.
Spelling scrolling text
Off
Spell unknown
You can set your radio to spell out the scrolling text broadcast by most DAB
stations.
1. Hold the Info button down for around three seconds. You hear a beep and
the scrolling text being spelled out and see a cursor on screen showing the
position within the text. You hear another beep when the text end is reached.
Planet Rock
net Rock - The
2. Turn the Tune knob to pause the speech and step forward (clockwise) or
back (anti-clockwise) within the text if required and press Tune to start the
text scrolling again.
3. Press the Tune knob while text is scrolling to stop the scrolling and return to
the start of the text.
4. Press the Info or Menu button to exit and switch off scrolling text speech.
6
Setting alarms
SONUS-1XT has two alarms which switch the radio on (if in standby) and tune
to a station or sound a tone. You can set alarms when your radio is on or in
standby as follows:
1. Press the Menu button and push the Tune knob to select the Alarm settings
option.
2. Turn the Tune knob to view and hear current Alarm 1 or Alarm 2 settings and
push if you want to change that alarm.
3. Turn the Tune knob to scroll through the following options, you see and hear
the current setting, push to change any of them. If you change a setting you
move to the next option on the list.
Set alarm
Set time
Set the alarm on or off.
Turn the Tune knob to set the hours, push the Tune knob, turn
and push to set the minutes.
Set days
Choose between Daily,Weekday, Saturday, Sunday or Weekend.
Set mode
Choose between a Radio (default) or Tone alarm. If you set a
radio alarm the volume will be whatever the volume control
is set at when the alarm goes off.
Select station Select the station you want your alarm to tune to. (If you
have selected Radio mode above.)
7
When finished, press the menu button or wait a moment and you’ll return to
your normal display mode. If your display mode is set to Clock you will see a bell
symbol on the screen and alarm time for each alarm that is set.
Note If you set a radio alarm and the station is not available when it is due to go
off a tone alarm will sound instead.
Changing the alarm snooze time
You can change the period that the alarm snoozes for when you touch the
SnoozeHandle™. The default is 8 minutes.
1. Press the Menu button, select Alarm settings and choose Snooze time. You
see the current snooze time at the top of the screen.
2. Turn the Tune knob to choose a snooze period between 5 and 59 minutes
and push to confirm the change. The snooze time set will apply to all alarms.
8 minutes
Cancelling alarms
When a radio or tone alarm goes off you have three options, Snooze, switch off
or switch on:
Snooze Tap the SnoozeHandle to snooze the alarm for the period set (the
default is 8 minutes). The radio or tone will mute and you see the
snooze icon on the screen. The alarm will repeat when the snooze
period has elapsed. You can repeat the snooze as many times as you
want up to 60 minutes after the last snooze.
8
The alarm will automatically turn off after 60 minutes. To cancel the snooze and
the alarm push the Tune button.
Switch off Press the Standby button to return to standby and cancel the
alarm.
Switch on If it is a tone alarm press the Tune button and the radio will switch
on. If it is a radio alarm, any button (other than Standby) will
operate as normal plus cancel the alarm.
Setting a sleep time
You can set a sleep time after which SONUS-1XT will switch itself into standby
mode, ideal if you want to fall asleep listening to the radio. You can also set a
Sleep time from standby which will switch the radio on first.
Sleep 15 minutes
Press the Sleep button and repeat to choose between 15, 30, 45, 60 or 90
minutes or select Off to set no sleep time. If your display mode is set to Clock
you will see a SLEEP icon on the display.
Press the Sleep button again to view and hear the time remaining until
SONUS-1XT will switch off or to change the sleep time again.
9
Recording from your SONUS-1XT
You can record from your SONUS-1XT using the Stereo Out or Digital Out sockets.
You can also set a record timer to automatically switch your unit on and tune to
a particular station at a time of your choosing – this may be useful if you have
a MiniDisc recorder or similar with a synchro-record facility and you use the
Digital Out socket. You cannot record one station and listen to another at the
same time. Note The volume level of the recording is at a set level and is not
dependant on the position of the volume knob.
Setting a record timer
The record timer function lets you set times at which your SONUS-1XT will
automatically switch itself on (if in standby mode) tune to a station for a
specified period then automatically switch itself off again. You can set up to nine
timers.
1. Press the Menu button and select the Record timer option.
2. Turn the Tune knob to view the nine timers and push to select and change
one.
3. Set the station, day, start time and duration you want and also whether you
want the speaker on or off. Push the Tune knob to select and turn to change
settings.
10
These instructions will not set the record time on your recorder. Some recorders
can detect when a digital S/PDIF signal is present (synchro-record) or you may
have to set your external recorder to start recording at the same time.
If using a synchro-record method you should check that the Digital out socket
is set to Off/Timer so that your recorder can detect when the recording is to
start. To do this, Push the Menu button, select Audio settings and choose Digital
output. Select the Off /Timer option.
When finished, press the Menu button or wait a moment and you’ll return to the
idle display mode and the timer will be set. If your display mode is set to Clock
you will see a timer symbol on the screen showing that one or more timers are
set. The timer list will also show ‘Set’ next to those that are currently active.
11
Setup options
Press the Menu button, turn the Tune knob and push to select one of the
following setup options. Some of these options are also available from standby.
Station order
Changes the order in which stations appear as you scroll through the station list.
Turn the Tune knob to scroll through the following options and push to select one:
Alphanumeric
Alphanumeric Displays all stations in alphanumeric order.
Fav station
Displays your most listened to stations at the top of the station
list and the rest below, in alphanumeric order. Your favourite
stations are displayed with a heart ( ) next to their names.
♥
Active station Displays active stations at the top of the service list and inactive
ones at the bottom in alphanumeric order. Inactive stations are
those on your station list but not currently available, marked with
a ’?’.
Multiplex
Lists stations in groups according to their multiplex. Multiplexes
or ensembles are groups of stations owned and broadcast by a
multiplex operator.
Trim stn. list Removes inactive stations from the station list.
→ presets Available only when Fav station order (above) has been selected.
♥
Transfers your favourite stations to the preset buttons.
12
Display settings
Turn the Tune knob to view current settings and push to change one of the
Display settings
following.
Brightness
High
Brightness
To change the screen brightness turn the Tune knob and push to choose
between Low, High or Low/Timeout (backlight off until a button is pushed).
Standby mode
Backlight off
You can choose whether the backlight is on or off when your SONUS-1XT is in
standby mode. If you switch the backlight off in standby mode a touch on the
SnoozeHandle will override this and turn the backlight on for a few seconds to
display the clock, useful for checking the time in the middle of the night.
To change the display standby mode turn the Tune knob and push to choose
between Backlight on and Backlight off.
Audio settings
Digital output
The Digital Output setting controls the Digital Out socket on the rear of your
radio. Turn the Tune knob and push to select one of the following options:
Digital out
On - if you want continuous output to an amplifier or recorder.
Off/Timer - if you want to connect to a recorder with a synchro-record feature.
13
DRC value
DRC 0
DRC (Dynamic Range Control) value makes the quieter sounds in a broadcast
easier to hear at low volume or in a noisy environment. The DRC level of a
broadcast is set by the station and sent with the signal. At the time of writing in
the UK only BBC Radio 3 and 4 regularly use DRC. Check with the broadcasters
to find out if they use DRC on their stations.
The DRC value setting is only available if VET is set Off see the following section
for details. Turn the Tune knob to scroll through the following options and push
to select one:
DRC 0 DRC is switched off. Any DRC level broadcast will be ignored.
DRC ½ DRC level is set to ½ that sent with the broadcast.
DRC 1 Applies the DRC level as sent with the broadcast.
VET levelling
Off
VET levelling
VET (Volume Equalisation Technology) helps level volume levels across
different stations making each sound as if it is at the same volume. It does this
by constantly monitoring the stations on your station list and lowering or raising
their volume to meet an optimum level.
Note When VET is On use of DRC would distort the levelling effect so DRC is
disabled when VET is On.
Turn the Tune knob and push to set VET On or Off.
14
Tuning
Tuning SONUS-1XT is very simple. When you first switch on it automatically finds
all the stations available in your area. You may want to re-tune if you move your
radio to a different room or if you want to receive a new multiplex. Multiplexes,
sometimes called ensembles, are groups of stations owned and broadcast by a
single operator. You can re-tune your SONUS-1XT at any time using the following
three tuning options:
Autotune UK
Scans all UK frequencies. This should only take a few seconds.
Autotune full
Scans the full frequency range in Band III. This is useful if you use your
SONUS-1XT outside the UK and may take a minute or more.
Manual tune
Shows signal level, which you can use to find the best position for your radio
and aerial.
1. Turn the Tune knob to scroll through different channels and push to choose
one (UK stations are in channels 11B to 12D). You see a signal level
display.The empty block indicates the minimum required level for reception
and the filled blocks indicate the current level.
15
2. Move your aerial while watching the display and to try to raise the current
level to the empty block or beyond. Once you have a good signal the display
will show the multiplex name and add the stations in that multiplex to the
station list.
3. Push the Menu button to exit or turn the Tune knob and push to change
channel.
Note You can also display the signal level for a station by pushing the Tune knob.
Sw version
Displays the version number of the software installed in your radio. You may be
asked to quote this if you contact Technical Support.
Sw upgrade
You can upgrade the software in your SONUS-1XT using a PC connected to the
USB connection on the rear panel. To install an upgrade, select Sw upgrade
and follow the instructions provided with the software. Upgrades may be issued
details of when software upgrades are available and instructions on how to
install them. To exit the Software upgrade menu press the Menu button again.
16
Demo mode
This mode demonstrates the unique speech features of the SONUS-1XT including
accessing alarm times and station name announcement. Info modes are also
demonstrated. While the unit is in demo mode a DEMO icon will appear on
display. All controls will work as normal when demo mode is switched on.
Note Demo mode works even if you currently have no signal. SONUS-1XT will use
pre-recorded samples for time and other announcements in this situation.
Turn the Tune knob and push to set the demo mode On or Off.
17
Hints and tips
This section provides information and advice on using your radio.
(‹‹/››) Secondary services
Secondary services accompany some stations, providing extra information or alternative content
and may only be broadcast at certain times. At the time of writing not many secondary services are
available. If a station has one or more secondary services available the display will show ‘>>’ next to
the station name on the station list and the secondary service will appear next to the station as you
turn the Tune knob. A secondary service will display ‘<<’ before the service name on the station list
showing that it belongs to the station preceding it in the list.
(?) Inactive or unavailable stations
Inactive or unavailable stations are stations which appear on the station list but are not currently
available because either you are outside the broadcast area, have lost reception or the station is
not currently broadcasting. If the station has ‘?’ before its name in the station list the station is
unavailable. If you select a station which has this symbol, your radio tries to tune to that station. If still
unavailable, you will return to the last station you were listening to.
I hear a ‘burbling’ sound on some stations
Although DAB is excellent at providing quality audio from very little signal, the quality can suffer if the
signal strength is too low. If that happens, a ‘burbling’ sound can sometimes be heard. To help reduce
this, check that your aerial is fully extended and upright. If the problem persists try moving your radio
or repositioning your aerial using manual tuning.
Display says ‘No stations available’
Check that your aerial is fully extended. Use Autotune to search for stations. Try using manual tuning to
adjust your aerial or radio position.
18
My alarm/timer didn’t work
Check that you set the alarm or timer on (If display mode is set to clock you will see a timer or alarm
icon on the display).
Check that the station you are tuned to is available – the clock/alarm/timer relies on the time signal
broadcast by the multiplexes.
If you are using synchro-record check that you have set the Digital out to Off/Timer this triggers your
recorder.
Clock shows the wrong time
This may happen if the multiplex you are tuned to broadcasts an incorrect time signal, try tuning to a
station in another multiplex.
None of the buttons seem to work
If the display is on but most buttons seem not to work your SONUS-1XT may be in standby. If so, you
should see a standby indicator ( ) on screen.
I can’t see my clock in the dark
Tap or hold (full brightness) the SnoozeHandle to illuminate the display if your unit is in standby or set
your display backlight on for permanent illumination.
Resetting your radio
Resetting your radio removes all presets, stored stations and favourite station settings and resets all
options to defaults. To select the reset option:
1. Press and hold the Menu button for more than two seconds. The display will show ‘Press Tune to
confirm reset’. Release the Menu button.
2. Press the Tune knob to confirm the reset or press no buttons to cancel the reset.
19
Warranty information
Imagination Technologies Ltd. warrants to the end user that this product will be free from defects in materials and workmanship in the course of normal use for a period of two years from the date of purchase. This guarantee covers
breakdowns due to manufacturing or design faults; it does not apply in cases such as accidental damage, however caused, wear and tear, negligence, adjustment, modification or repair not authorised by us. Please return your warranty card
to register your product with us. Should you have a problem with your unit please contact your supplier or contact PURE Digital Support at the address shown on the rear of this manual.
Copyright
Copyright 2005 by Imagination Technologies Limited. All rights reserved. No part of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, or translated into any human or computer language, in
any form or by any means, electronic, mechanical, magnetic, manual or otherwise, or disclosed to third parties without the express written permission of Imagination Technologies Limited.
Disclaimer
Imagination Technologies Limited makes no representation or warranties with respect to the content of this document and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Further,
Imagination Technologies Limited reserves the right to revise this publication and to make changes in it from time to time without obligation of Imagination Technologies Limited to notify any person or organization of such revisions or
changes.
Trademarks
SONUS-1XT, iVOX, VET, SnoozeHandle, PURE, the PURE logo, PURE Digital, the PURE Digital logo, Imagination Technologies, and the Imagination Technologies logo are trademarks or registered trademarks of Imagination Technologies Limited.
All other product names are trademarks of their respective companies.
PURE Digital, Imagination Technologies Ltd., Imagination House, Home Park Estate, Kings Langley, Herts, WD4 8LZ, UK
+44 (0)1923 277477 support
+44 (0)1923 277488 sales
+44 (0)1923 270188
12H93
|